Home >

ROSCHEN GROUP company news

LEAVE A MESSAGE

News

Design and numerical analysis of a large-diameter air reverse circulation drill bit for reverse circulation down-the-hole air hammer drilling

2024-10-09

Design and numerical analysis of a large-diameter air reverse circulation drill bit for reverse circulation down-the-hole air hammer drilling Reverse circulation down-the-hole (RC-DTH) air hammer drilling is a fast and cost-effective method for hard rock drilling. As the air RC drill bit is the ...
Reverse Circulation (RC) Drilling Equipment

2024-10-09

Reverse Circulation (RC) Drilling Equipment The Reverse Circulation drilling (RC drilling) method involves air being forced down between the inner and outer pipes of a dual wall drill pipe with the cuttings being forced up through the centre of the drill rods. This is the opposite of conventional ...
Reverse Circulation Drilling with Air using a Rock Bit (Tri-cone/PDC)

2024-10-09

Part 1 of 3 – Intro to Drilling with DT Reverse Air and Flooded Reverse Methods Reverse Circulation Drilling with Air using a Rock Bit (Tri-cone/PDC) Dual tube methods have become standard practice in mining, water well, and large borehole drilling in recent years. With the growing popularity of ...
How to Design Reverse Circulation System

2024-10-09

How to Design Reverse Circulation System 1. How to Define Sink Ratio? The sink ratio which related to depth of air water mixer sinking under water is key to whole reverse circulation drilling system’s working efficiency Below formula is how to calculate the sink ratio: m = h1/(h1+h2) m= Sink ratio ...
Reverse Circulation Drilling Techniques

2024-10-09

The Intricacies of Reverse Circulation Drilling Techniques Unlike its counterparts, the RC drilling rig leaves an indelible footprint, uncovering the secrets of the Earth in large-diameter wells. This technique, distinctive in its approach, delves into unconsolidated materials with a prowess ...

2 3 4 5 6 7 8 9



86-137-64195009



roschen@roschen.com



65 EAST XINHUAN ROAD, SHANGHAI, CHINA

Design and numerical analysis of a large-diameter air reverse circulation drill bit for reverse circulation down-the-hole air hammer drilling

Reverse Circulation (RC) Drilling Equipment

Reverse Circulation Drilling with Air using a Rock Bit (Tri-cone/PDC)

How to Design Reverse Circulation System

Reverse Circulation Drilling Techniques

Down The Hole Drilling

Drill Rod

Tricone Drill Bit

Diamond Core Drill Bits

Down The Hole Hammer