THE NEW RH560 ARRIVES WITH A BANG!
The most premium hammer arrives to the market to meet the continued demand for increased productivity through cutting edge solutions.
THE GREATEST PERFORMER YET
The mining industry continues to demand even higher levels of productivity. Performance takes precedence thanks to reduced handling and less downtime of the RH560 hammer.
UP TO 15 % INCREASE IN PENETRATION RATE
With its enhanced air cycle and piston design, the RH560 delivers higher striking power leading to more power output. With less inside parts this hammer provides outstanding reliability. We have simply combined the reliability of our RH460 yet keeping the simplicity of RH510. RH560 is here to stay.
GREAT START WITH SMOOTH COLLARING
With an ability to build up pressure gradually, the RH560 hammer starts up smoothly allowing for better and quicker collaring in any rock condition. Even in complex rock formations and against uneven surfaces. Exact collaring and straight holes are prerequisites for productive drilling with maximum advance, and lower overall costs. This saves overall drilling time and reduced frustration for the driller.
NO FOOT VALVE FOR TROUBLE-FREE PERFORMANCE
In almost any ground conditions RH560 will give you higher productivity, improved reliability and better drilling economy through less air consumption. Delivers the high impact and energy transfer needed to keep you going on and on.
HIGHER POWER OUTPUT FOR THE SAME AIR CONSUMPTION
With a focus on optimized air cycle, the hammer improves reliability and economy through cutting air consumption, increasing power and improving lubrication. This allows for drilling bigger sized holes at the same speed as a smaller hole with a standard hammer, giving high productivity in variable ground conditions. Not a patented piston.
OPTIMIZED AIR CYCLE
. Lower fuel consumption
. More responsive drilling
. Up to 15% higher penetration rate
. Less prone of breakage
. Low air consumption (15% less than before)
. Faster building up of air pressure
. Higher frequency means more impact/minute
. Increased power output
RH560 A BIG HAMMER WITH BIGGER ADVANTAGES:
. Simple overall design minimizes failures
. Optimized, piston and bit design maximizes energy transfer efficiency
. Higher penetration rate up to 15%
. Low air consumption meaning less fuel consumption yet more power
. No foot valve meaning no small parts causing unnecessary breakdown
. Less downtime means less handling of the hammer, lower injury risk
|Complete hammer||Part No.|
|3 1/2" API Reg Pin||32-5665-GQA-04C|
|#28 Cubex Pin||32-5665-GQA-56C|
|Air Consumption, CFM||Air Consumption, M3/Min, Din 1343|
|150 psi||250 psi||350 psi||10 bar||18 bar||24 bar|
|Weight||Outside diameter||Hammer length||Hammer length with bit|
|Bit closed||Bit extended|
|ROSCHEN Model||Model||Size||Weight lb.||Outside diameter||Length||OP pressure psi|
For more information, please contact:
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: email@example.com ; firstname.lastname@example.org
Website: http://www.roschen.com ; http://www.roschen.net
|Contact Person :||Mr. Bill, George, Michael|