Diamond Core Drill Bit HMLC NMLC for Roller Compacted Concrete Dam Exploration Core Drilling
HMLC NMLC Diamond Core Drill Bit for Roller Compacted Concrete Dam Exploration Core Drilling
Roller compacted concrete dam(RCCD)
HMLC NMLC Surface-Set Diamond Core Drill Bit for Roller Compacted Concrete Dam Exploration Core Drilling
To select the right bit:
1) Please assess the speed and power of your drill for the size and depths of the holes
2) Please assess ground conditions (such as Stone / Granite / Concrete ) and down-hole conditions.
1) ROSCHEN have all standard size of Diamond Core Drill Bits (Surface-Set) .
3) Different customers have different requests, we can make customize Diamond Core Drill Bits.
ROSCHEN offers crown impregnated depths of 9mm, 12mm, and 16mm Diamond Core Drill Bits. The taller crown heights can improve bit life time, have better stability and performance, reduce vibrations.
Specially about Waterways:
Diamond impregnated bits are suit for various waterways. Diamond Core Drill Bits suit better flushing in various ground conditions and drilling systems.
1) Standard WL threads
2) As well as thread types required by clients are available.
ROSCHEN offers crown impregnated depths of 9mm, 12mm, and 16mm Diamond Core Drill Bits. And also can supply different kinds of diamond core bits in different size, which are used in shale, sandstone, limestone, marble, dolomite, schist, granite, quartz, ironstone, chert, abrasive rock etc. Including impregnated diamond core bit, surface-set diamond bit, reaming shells, casing bit, casing shoe bit, core lifter, core lifter case, core barrel assembly, inner tube head assembly, over shot, hoist plugs, drill rod, casing pipe etc.
Surface-Set diamond bits are primarily recommended for use in drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bits. They are also recommended for use in drilling harder formations where the available rotational speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.
"WL" series: AWL, BWL, NWL, HWL, PWL/AWLTK, BWLTK, BWL3, NWL2, NWL3, NWLTT, HWL3, HWLTT, PWL3, PWLTT
T2 series: T2 46, T2 56, T2 66, T2 76, T2 86, T2 101
WF series: HWF, PWF, SWF, UWF, ZWF
WT series: RWT, EWT, AWT, BWT, NWT, HWT
WM series: EWM, AWM, BWM, NWM, HWM
WG series: EWG, AWG, BWG, NWG, HWG
Others: NMLC, HMLC, LTK48, LTK60, BGM, NGM, ADBG, TBW, TNW, ATW, BTW, NTW, NXD3, AX, N
|Size||Outside Diameter||Inside Diameter|
For more information please contact:
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: firstname.lastname@example.org ; email@example.com
Website: http://www.roschen.net ; http://www.roschen.cn
http://www.roschen.com ; http://www.roschengroup.com
|Contact Person :||Bill, George, Michael|