Underground mining Water Drilling Rig for Drilling and Blasting hole Drilling Rig
1 set
MOQ
Negotiate
Price
Underground mining Water Drilling Rig for Drilling and Blasting hole Drilling Rig
Features Gallery Product Description Request A Quote
Features
Basic Infomation
Place of Origin: CHINA
Brand Name: ROSCHEN
Certification: ISO
Model Number: RS-100
High Light:

rock drilling equipment

,

borehole drilling machine

Payment & Shipping Terms
Packaging Details: Bundles
Supply Ability: 1000 sets
Specifications
Name: Drilling Jumbo
Type: Underground Mining
Use: Drilling And Blasting Hole
Machine: Drilling Rig
Usage: Hydraulic Top Hammer Drilling Rig
Model: Tunnel Drilling
Product Description

Drilling jumbo For Underground mining for Drilling and Blasting hole Drilling Rig



Model: RS-100 Drilling jumbo

Use:

 

Drilling jumbos are usually used in underground mining, if mining is done by drilling and blasting. They are also used in tunneling, if rock hardness prevents use of tunneling machines.

 

Description:

A drilling jumbo consists of one, two or three rock drill carriages, sometimes a platform, which the miner stands on to load the holes with explosives, clear the face of the tunnel or else. The carriages are bolted onto the chassis, which supports also the miners cabin and of course the engine. Modern drilling jumbos are relatively large, there are however smaller ones for use in cramped conditions. Whereas modern jumbos usually fitted with rubber tyres and diesel powered, there are also exist variants with steel wheels, to ride on rails and even single carriage sled-mounted ones. Electric power is also common, historical jumbos were powered by compressed air. Electricity and compressed air produce of course no exhaust gases, which is preferable if work is done in smaller tunnels where good ventilation is difficult.



Advantages:

1. The RS-100 is a hydraulic top hammer drilling rig designed for a 12-35 m2 cross section for use in underground mining projects.
2. Robust universal drilling boom creates ideal face drilling coverage. Automatic parallelism and 360 roll over enable easy, fast and accurate positioning for face drilling. Sideaways drilling and bolt hole drilling.
3. The configuration of components allows for the operator to have a clear view when drilling and traveling. A powerful and well balanced 4 wheel drive chassis lets the tunneling drilling rig move through limited space and tough terrain in the mines. A dual circuit service brake and enclosed multi-disc parking/emergency brake ensure safety in tramming and on sloped terrain.
4. Field proven high frequency hydraulic drifter delivers high performance. A trapezoidal percussion piston optimized shock wave transfer efficiency, so the drill can penetrate deeper while decreasing cost of replacement parts.
5. The operator cab is safe and comfortable. Many automatic features simplify drilling control so miners can focus on fast and accurate drilling.
6. All service points of the hydraulic drifting jumbo are easily accessible, simplifying routine maintenance.



RS-100 Main Features and Technical Parameters:

Length 11300mm  
Width 1750mm  
Height 2000/3000mm  
Walking Speed, Horizontal 10 km/h  
Grade Ability 0.25  
Protection    
Noise Level <100 dB(A)  
Adjustable Safety Canopy POPS + ROPS  
Drilling System    
Drifter 1xHC50/R38 1xHC109/R38
Weight 112 kg 151 kg
Percussion Power 13 kW 18.8 kW
Percussion Flow 105 L/min 135 L/min
Percussion Power 130 bar 135 bar
Rotation Pressure 150 bar 150 bar
Frequency 62 Hz 47 Hz
Rotation Torque 325 Nm 780 Nm
Hole Dia. 32-89mm 45-102mm
Rod Size R38-H35-R32  
Feed Roll Over 360o  
Pushing Length 3450mm  
Feed Stroke 1600mm  
Elevation Angle 90o  
Blow Angle 90o  
Swing Angle Left 45o Right 45o  
Boom    
Model K26F  
Type Automatic Parallelism  
Boom Extension 1200mm  
Elevation Angle 45o  
Blow Angle 16o  
Swing Angle Left 45o Right 45o  
Electric Hydraulic Power Station    
Motor Power 45 kW/55 kW AC three phase  
Percussion + feed + boom Variable piston pump  
Rotation Gear pump  
Filtration 10ɥ  
Hydraulic Tank 240L  
Hydraulic Oil Cooler Water cooler  
Voltage 380V  
Frequency 50Hz  
Start △-Y  
Cable Reel 1xK440  
Cable Length 100m / 80m  
Cable Size ɸ28mm/ɸ32mm  
Cable Type 3x35+3G6+2x1.5  
3x50+3G6+2x1.5  
Water and Air System    
Compressor 1xJN5  
Output 0.5m3/min  
Pressure 5-7 bar  
Shank lubrication Oil mist  
Shank lubrication Air Consumption 0.3m3/min  
Shank lubrication Oil Consumption 180-250g/h  
Flushing Pump 1xCR3  
Power 1.5 kW  
Output 3m3/h  
Under Carriage    
Diesel Engine Deutz BF4L2011 53 kW, 2800rpm  
Tail Gas Clean-up Exhaust catalysts  
Drive System 4-wheel drive  
Oscillation Rear axle ±10o  
Tire 11.00-20  
Steering ±40o articulation  
Service Brake Duo-Circuit disc brakes  
Parking/Emergency Multi-disc on trans  
Fuel Tank 60L  




 

For more information please contact:




ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.net ; http://www.roschen.cn

http://www.roschen.com ; http://www.roschengroup.com

Recommended Products
Get in touch with us
Contact Person : Mr. Bill, George, Michael
Tel : 13764195009
Fax : 86-021-54380177
Characters Remaining(20/3000)